Maintenance
As the temperature drops, how should your machine be maintained?
Appropriate grades of diesel, engine oil and hydraulic oil should be added to the high-altitude operation equipment, and sufficient antifreeze should be added (some customers use water instead of antifreeze, but low temperature may cause radiator rupture and diesel engine failure, so this operation is not recommended).
At the same time, the drop in temperature will lead to a reduction in battery capacity and activity. It is necessary to pay attention to the maintenance of the battery. Generally, batteries of the same specification will be used for one or two hours less in winter than in summer. Please charge the battery in time.
In addition, the storage environment for the aerial work platform should be indoors, preferably in a place with a temperature that is not too low. It is essential to avoid leaving it outdoors for a long time in the cold. If it is not convenient to move, protective measures must be taken.
- Pre
What exactly are the reasons for the excavator's sluggish movement and slow speed? We've found it fo
1. Whether the data from the high and low pressure sensors a...
- Next
Technical Essentials - Common Faults and Solutions of Hydraulic Systems
1. No-load debugging stageThe failure rate of the hydraulic ...
Related articles
- Analysis and Judgment of the Causes of Crankshaft Ablation
- A Brief Discussion on the Maintenance of Hydraulic Systems in Construction Machinery
- Measures to improve the working efficiency of stabilized soil mixing plant equipment
- Measures to improve the working efficiency of stabilized soil mixing plant equipment
- The correct use of cyclone dust collectors
- Exquisite craftsmanship shines in the land of a thousand Islands! XCMG XE690DK was grandly launched
- XCMG made a grand appearance at CONEXPO-CON/AGG 2023, which was the largest overseas exhibition in t
- Shift selection, low fuel consumption and high efficiency. Experts interpret the "fuel-saving p
- Green and efficient! Shandong Lingong E6375H initiates a new experience of the four major national e
- Komatsu has moved the manufacturing of its HM400-5 ADT back to Chattanooga

