When the dry sweeper is in operation, it no longer suppresses dust

Features

The unique vacuum hood for sweeping and brush and the spiral slider adjustment combination mechanism not only solve the problem of dust during sweeping and brush operations, but also address the industry challenge that pure suction road sweepers cannot clean up roadside garbage, filling the gap both domestically and internationally.

Scope of application

Mechanized cleaning and sanitation operations on expressways, ring roads, main urban roads, airports, docks and other places are particularly suitable for water-scarce areas and winter cleaning and sanitation operations in northern China as this vehicle can carry out cleaning work without the need for water spraying and dust removal.

What could be the reasons when a dry sweeper that does not generate dust during operation has a large amount of dust emissions and poor dust suppression effect? Then how can it be solved? Next, the editor will reveal the secrets for you.

1. Reason

The suction air duct is closed or blocked.

The dust on the road surface is too thick, the speed of the sweeping disc is too high or the sweeping speed is too fast.

The sweeping posture and dust cover are abnormal.

The dust removal filter cartridge is clogged.

The filter cartridge is damaged.

The installation bolts of the filter cartridge are loose.

2. Exclusion methods

Check the dust suction duct.

Reduce the cleaning speed appropriately and select medium or low speed of the sweeping disc.

Adjust the sweeping tray and dust cover to the appropriate working state.

Switch to the forced filter cartridge cleaning position.

Replace the filter cartridge.

Re-tighten the installation bolts of the filter cartridge.