Maintenance
How to install and maintain the clutch of a loader?
The installation and maintenance of the clutch are:
When installing the clutch, calcium-based grease should be filled in the inner cavity of the release bearing. This machine has a grease nipple on the outside of the release bearing, and vaseline (grease) should be injected regularly and in limited quantities.
2) When installing the clutch, the locating manhole should first be inserted into the bearing to ensure that the splined holes of the main and auxiliary friction plate assemblies are concentric with the flywheel, facilitating the connection and installation of the transmission assembly.
3) The maintenance contents include cleaning the shell, checking and adjusting the separation gap, regularly injecting lubricating grease, and cleaning the oil stains on the friction plates when necessary.
Related articles
- Analysis and Judgment of the Causes of Crankshaft Ablation
- Analysis and Elimination of Common Faults of Excavators
- Exquisite craftsmanship shines in the land of a thousand Islands! XCMG XE690DK was grandly launched
- XCMG made a grand appearance at CONEXPO-CON/AGG 2023, which was the largest overseas exhibition in t
- Shift selection, low fuel consumption and high efficiency. Experts interpret the "fuel-saving p
- "Green Journey through Yan and Zhao!" Zoomlion's Lingguan series of rechargeable mixer tru
- Green and efficient! Shandong Lingong E6375H initiates a new experience of the four major national e
- Wkonosen showcased a 1.7-ton electric excavator and a new type of loader at CONEXPO-CON/AGG
- A Brief Discussion on the Conditions and Mechanisms for the separation of Dust from Air
- Pollution control in hydraulic system installation
