Ling Yu: All the little details about using the powder can that you don't know are here! Don't miss it this time!

Only capable of driving powder tankers

But didn't pay attention to these small details?

This won't do!

Key points

Truck drivers, please give it a thumbs up and save it quickly!

1) Make sure there is no pressure inside the can before opening the can lid.

2) When loading materials, it is necessary to avoid mixing foreign objects into the tank, which may block the discharge pipe and affect the discharge speed and residual rate.

3) The tank should be kept dry on a daily basis to prevent the powder from caking.

4) During maintenance, be cautious of dropping and bumping parts, and avoid knocking to prevent damage, deformation, bumps, scratches, etc. on the parts. When reassembling parts, it is essential to pay attention to cleanliness.

5) When accelerating, remember not to step on the accelerator too hard and apply force evenly.

6) Remember never to exhaust through an external air source port.

7) When the air compressor stops working due to other reasons during the pressure reduction process, the inlet ball valves of the front and rear compartments should be closed, and then the external air source should be opened. After a while, turn off the external gas source and open the intake ball valves of the front and rear compartments.

8) After the first unloading, it is essential to inspect the bolts and U-bolts at the support points and tighten each bolt one by one. In the future, all bolts should be inspected regularly. If any are found loose, they should be tightened.

A car needs careful care

Only in this way can we make money better

The above are some tips for using powder tankers

Have all the truck drivers remembered?