Daily maintenance and repair methods for vibrating screens

The purpose of maintaining and repairing vibrating screens is to understand the overall condition of the vibrating screen and restore its working capacity by repairing and replacing damaged or worn parts.

1. Daily maintenance of vibrating screens

The daily maintenance of vibrating screens includes the surface of the screen, especially the tightness of the screen surface. When the vibrating screen becomes loose, it should be tightened in time. The surface of the vibrating screen should be cleaned regularly. For areas where the paint has peeled off, timely repair, rust removal and repainting should be carried out. For exposed processing surfaces, industrial vaseline should be applied to prevent rust.

2. Regular maintenance of the vibrating screen

Regular maintenance of vibrating screens includes weekly and monthly inspections.

(1) Weekly inspection of vibrating screen: Check the tightness of bolts on the exciter, screen surface, support device and other parts. When the vibrating screen is loose, it should be tightened. Check the usage condition of the transmission device and the locking condition of the connecting bolts. Use the vibrating screen to check the tension of the V-belt and tighten it appropriately if necessary. When inspecting the screen of a vibrating screen, special attention should be paid to checking whether the unbalanced weights on the flywheel are securely fixed. If they are not firmly fixed, during the operation of the screen, the unbalanced weights of the vibrating screen may come off the flywheel, causing a safety accident.

(2) Monthly inspection of vibrating screens: Check the wear condition of the screen surface. If obvious local wear is found on the vibrating screen, necessary measures (such as repositioning, etc.) should be taken and the screen surface should be re-tightened. Inspect the entire screen frame of the vibrating screen, mainly check the welds of the main beam and all the crossbeams, and carefully inspect for any local cracks. Check the condition of all the bolts on the side plates of the screen box. When a gap or looseness is found between the bolts and the side plates of the vibrating screen, new bolts should be replaced.