Experts introduce how to prevent "heatstroke" in summer high-temperature crushers

Mining equipment is a type of large-scale mechanical equipment, mostly working outdoors. In summer, the outdoor temperature is generally high, and the working conditions for workers are harsh. The working conditions of crushers can be described as extremely poor. In summer, due to the high temperature of the flowing air, it is not conducive to the operation of the equipment. Therefore, the temperature of the high-temperature crusher equipment in summer is prone to be too high, causing faults such as shutdown. This requires users to pay attention from multiple aspects to prevent the device from "heatstroke".

First of all, the maintenance and upkeep of the crushing machine equipment should be carried out carefully. Regularly conduct a comprehensive inspection of the equipment, carry out maintenance and upkeep, replace the "three filters" of the engine and the engine oil, replace or adjust the belts, and check whether the fan, radiator, generator, compressor and other components can operate normally.

Secondly, clean the oil stains and dust on the engine body in a timely manner to ensure good heat dissipation of the engine.

Secondly, change the appropriate viscosity grade of the engine oil for the equipment. Generally, the viscosity grade of the engine oil in summer should be slightly higher than at other times. The engine oil and lubricating oil in all parts should be replaced with summer oil. The oil quantity should be appropriate. Regularly check for any oil leakage, especially the fuel, which should be replenished in time.

Next, check whether the cooling system and fuel system are unobstructed, and replace the aged wires, plugs, oil pipes, screws, and tighten the fuel lines to prevent fuel leakage.

Then, in summer, the outdoor temperature is high, and high temperatures can easily have adverse effects on the equipment. It is recommended that you ensure the equipment is placed in a shady area whether it is shut down or in operation. If the temperature is high in summer, you can build a temporary sunshade for the equipment. Avoid exposing the equipment to direct sunlight for a long time.

Finally, the high temperatures in summer increase the failure rate of equipment and the incidence of fires. Experts from Hongxing suggest that you must randomly equip each machine with 1-2 fire extinguishers to prevent any unexpected situations.

Paying attention to the heatstroke prevention and cooling of equipment in summer is the basic prerequisite for ensuring the safe production and efficiency of equipment. Hongxing Machinery hopes that the heatstroke prevention of crushing equipment in summer can draw the attention of every user.