XCMG: G2 Generation 100-ton class - XCT100G5-1

The 100-ton truck with a 5-section boom has become the preferred and popular model for many crane operators due to its powerful lifting capacity and excellent adaptability to various sites. The G2 generation XCT100G5-1 is like a magnifying glass in the industry, sharply magnifying the advantages of the 5-section 100-ton truck!

The XCT100G5-1 is equipped with a dual-cylinder synchronous retraction technology. The second, third, fourth and fifth sections of the arm retract simultaneously, which is more than half faster than traditional vehicles where the third, fourth and fifth sections of the arm are retracted first and then the second section.

Many experienced drivers say that traditional cranes can also extend and retract while carrying a load. We are very shocked by this because the design of traditional cranes does not take this function into account. Forcing the extension and retract while carrying a load is not only dangerous but also causes great damage to the vehicle. Therefore, we hope everyone will not operate it in a dangerous way. Moreover, if the vehicle itself does not have this function, forcing it will be punished by the construction party, which is not worth it! However, G2 is an exception. Dozens of key components of G2, such as the slider and hydraulic cylinder, are specially designed for load-bearing extension and retraction. Therefore, there is no risk in the load-bearing extension and retraction of G2, and it does not damage the large arm. Not only is the hoisting efficiency twice as fast as traditional hoisting, but it also has incomparable advantages in low factories!

The load extension and retraction capacity can reach 70% of the lifting capacity under the same working conditions. For instance, if a certain working condition can normally lift 10 tons, then the maximum load extension and retraction capacity is 7 tons. However, not all G2 models have a 70% extension and retraction capacity. Some models have a load extension and retraction capacity of 50% to 60% under the same working conditions, while others have 80%. Therefore, it still depends on which vehicle it is.

Equipped with the new generation of electro-hydraulic energy-saving control technology as standard, this technology was analyzed in yesterday's article. The XCT100G5-1 equipped with this technology can reduce the combined operation fuel consumption by more than 25%. Saving fuel means saving money and being worry-free!

Saving fuel is not enough. The R&D engineers of G2 have taken "stinginess" to the extreme. The high-power Weichai engine can carry the entire 29-ton counterweight for heavy-load transfer. If we can avoid calling a flatbed truck to pull the counterweight, we definitely won't!

The G2 vehicle is equipped with an all-condition precise and smooth control technology. This technology incorporates a new generation of intelligent pump and valve composite control system, integrating a 9-piston motor high-precision winch, multi-stage pressure rotation buffer, and electro-hydraulic proportional intelligent telescopic technology. This enhances the subjective evaluation of handling by 20% and improves micro-motion and smoothness by 30%. Regarding the specific parameter details of this technology, We will provide a detailed introduction in detail in the near future.

The main boom is 51.5-meter, and the fully extended boom can lift 16.8 tons. Its high-frequency performance is extremely outstanding! The total number of steering laps has been reduced from 6 to 4.9, and the steering handling force has decreased by 20%, making the operation more convenient. It is flexible at low speeds and stable at high speeds. The steering wheel automatically returns to its original position, reaching the level of passenger cars.

Imagine the G2 stretching and retracting while carrying a load, with multiple actions performed simultaneously! Coupled with the vibrating pulse handle, the experience is truly amazing. Do you want to give it a try? Welcome everyone to our factory to experience operating the G2 model in person. Recently, there have been users coming to Xuzhou every day to experience it. Perhaps only by experiencing it in person can one truly appreciate the beauty of the G2.