March towards the "new"! XCMG G2 Reveals its "Green Answer Sheet"

In midsummer, the greenery is in full swing

XCMG is flourishing towards the "new"

Create a new picture of green development

In April this year, XCMG, the world's leading crane manufacturer, launched the G2 high-end brand. Among them, not only traditional fuel-powered cranes but also new energy cranes have attracted industry attention.

Empowered by technology, a "new" path is blazed

Before the official launch of the G2 high-end brand, XCMG's XCA300L8_HEV, the world's largest tonnage hybrid all-terrain crane based on the G2 technology platform and eligible for a green license plate, had already made its debut at the 2023 BICES exhibition and won the Platinum Award for Technological Innovation in the industry evaluation.

XCMG's G2 generation new energy cranes are full of representative works, including models such as XCT25G5-1HEV, XCT50G5_1HEV, and XCT160G8-1HEV, covering common tonnage classes and meeting various market demands.

Behind XCMG's G2 new energy crane leading the industry, what exactly gives it the confidence?

Special blade battery for construction machinery

Long service life, high temperature resistance, puncture resistance. Use with confidence. No fire or explosion. Jointly developed by XCMG Power and BYD, it leads the industry in safety.

High-power and high-efficiency range extender

The dedicated engine for range extenders, with the optimal efficiency of the engine and generator superimposed, has achieved the industry's highest engine thermal efficiency, with an oil-to-electricity conversion ratio of ≥4.1Kwh/L.

XCMG Intelligent Control hybrid system for cranes

Based on the dual working conditions of crane travel and operation, the industry has pioneered an energy conversion efficiency model, ensuring that the engine always operates efficiently, with the best efficiency output of oil and electricity. This results in lower vehicle usage costs throughout the crane's life cycle, with an annual comprehensive savings of over 50% in vehicle usage costs.

The industry's first parallel charge and discharge control technology

When the crane is plugged in for operation, the power battery is connected in parallel with the power grid for output. The power battery "peak-shaving and off-valley filling" of the power grid output can not only meet the power demand of the crane operation, but also reduce the number of battery cycles, minimize the impact of high-power output on the power grid, and at the same time significantly extend the service life of the power battery, avoid power tripping at the construction site, and improve the adaptability to working conditions.

Green fashion, creating "new" value

At present, the green trend in China's and the global construction machinery industry is accelerating its implementation. As a leader, XCMG is also continuously deepening its systematic capabilities. Whether in the era of traditional fuel engines or in the new energy sector, XCMG Crane Machinery has established a complete technical system and created a full-scenario crane ecosystem application platform that is segmented and meets the needs of various users.

On the one hand, XCMG Crane Machinery was the first to secure a position in the new energy sector and has built a continuously improving new energy product line, becoming a leading technology hub in the digital and intelligent era's transformation. On the other hand, as China's construction machinery industry rapidly evolves towards green development, users' demands for equipment usage experience and value returns are getting higher and higher. Only products with no weaknesses in all aspects of comprehensive strength can meet the deep-seated upgraded demands of users.

Looking at the development history of the crane industry, in the historical trend, whether a product can set sail and sail far depends crucially on the word-of-mouth from users. For the XCMG G2 series of new energy cranes, XCMG always conducts research on the needs of the user group first to ensure that it can precisely meet the users' demands in terms of technology, safety, design, endurance, usage cost and quality.

XCMG G2 hybrid crane is always helping users keep their money safe. Take the 25-ton hybrid model as an example. Calculated based on a 10-year life cycle, 8 hours of operation per day, and 250 days of operation per year, XCMG products can save 47,800 yuan in energy costs alone each year, and the entire life cycle directly brings economic benefits of 478,000 yuan.

In the future, XCMG will continue to promote green design, green products, green manufacturing and green construction, accelerate the breakthrough of key technologies in new energy, and provide strong support for the green and healthy development of the industrial chain.