Whole machine
Come and have a look quickly! The king of self-employed working hours in the province turns out to be Sany SY235H
PART 01
Good steel should be used on the edge of a knife
The energy transfer rate has been further enhanced, with no waste at all
Adopting Kawasaki's full electronic control technology, combined with a fully electronic control main valve and handle, the controller precisely controls the valve core, rationally allocates flow, further reduces pressure loss and lowers fuel consumption. By optimizing the control program, the energy transfer rate has increased by 3%, further reducing fuel consumption.
The combined fuel consumption is reduced by about 6% compared with the previous generation of products!
PART 02
Work hard but eat little
Outstanding energy efficiency ratio, capable of competing at the same level and above
Taking the commonly used gear (S8 gear) as an example, after working for the same 2,000 hours, compared with SY235H, the overall income is 255,600 yuan more. (Calculated at 200 yuan per vehicle and 7.5 yuan per liter for diesel
The maximum energy efficiency of the SY235H in common Settings exceeds approximately 14%, and in the highest Settings, it exceeds approximately 8%.
PART 03
Despite its large size, it still performs embroidery.
"Precise positioning!" Precise control!
Adopting Kawasaki's latest fully electronic control system, through the application of high-performance electro-proportional control of the main valve, precise control of the valve core by the controller is achieved, significantly enhancing operational performance.
The length of flat land has increased by 53% compared to the previous generation!
PART 04
Personalized customization, flexible adaptability
The core is powerful and has excellent adaptability to working conditions
It adopts high-performance electrically controlled main valves, electrically controlled operation handles and upgraded hydraulic controllers, enabling each valve core to be adjustable. It can be matched and debugged according to different construction scenarios of customers.
According to different construction conditions, it is standard-equipped with a 1.35-cubic-meter large-capacity earthwork bucket, and can be optionally equipped with 1.1 to 1.25-cubic-meter rock buckets to meet the diverse needs of customers.
Related articles
- Analysis and Judgment of the Causes of Crankshaft Ablation
- Analysis and Elimination of Common Faults of Excavators
- Exquisite craftsmanship shines in the land of a thousand Islands! XCMG XE690DK was grandly launched
- "Low-carbon Warrior!" XCMG's natural gas loaders have been delivered in batches
- XCMG made a grand appearance at CONEXPO-CON/AGG 2023, which was the largest overseas exhibition in t
- Shift selection, low fuel consumption and high efficiency. Experts interpret the "fuel-saving p
- "Green Journey through Yan and Zhao!" Zoomlion's Lingguan series of rechargeable mixer tru
- Green and efficient! Shandong Lingong E6375H initiates a new experience of the four major national e
- Wkonosen showcased a 1.7-ton electric excavator and a new type of loader at CONEXPO-CON/AGG
- A Brief Discussion on the Conditions and Mechanisms for the separation of Dust from Air

