Maintenance
Analysis of Common Faults of Gear Pumps for Compaction Garbage Trucks
1. Reasons for the oil pump not discharging oil or insufficient flow
The pump doesn't rotate.
The oil suction pipe or oil suction filter is clogged
The amount of hydraulic oil is too low
The internal components of the pump are worn or damaged
The seal is damaged.
Exclusion method
The spline of the pump is damaged or the power take-off cannot be engaged
Analyze, inspect and repair, and clear blockages
Add hydraulic oil to the specified height
Replace or repair replacement
2. Reasons for high noise and large pressure fluctuations
The oil suction pipe or oil suction filter is clogged
There is a large amount of air in the oil circuit
The internal components of the pump are worn or damaged
The oil is contaminated or emulsified
Exclusion method
Analyze, inspect and repair, and clear blockages
Exhaust
Replace or repair
Change the hydraulic oil
3. Causes of abnormal fever
There is a large amount of air in the oil circuit
The amount of hydraulic oil is too low
System blockage
Exclusion method
Exhaust
Pressurize the oil to the specified height
Analyze, inspect and repair, and clear blockages
Related articles
- Analysis of Two Cases of Schwing Concrete Pump Displacement Adjustment Faults
- Detailed Analysis of Faults in the Vibration System of Road Rollers
- Heat Hazards and Fault Analysis of Excavator Hydraulic System
- Analysis and Elimination of Common Faults in the Hydraulic System of Vibratory Rollers
- Inspection and Analysis of No Steering Faults in Crawler Hydraulic Steering Bulldozers
- Maintenance methods and measures for common hydraulic systems of construction machinery
- General steps for excavator faults and diagnosis
- Analysis and Treatment of Slippage Causes in Rotary Drilling Rig Mudstone Drilling
- Troubleshooting methods for forklift gear shift thrust faults
- Analysis of the Causes and Maintenance of the deviation Fault of Crawler Crane Travel

